poster
HomeProductsMetering Unit0928400779 Pump-Mounted Fuel Metering Valve for Ram and Jeep 3.0L Diesel Applications
0928400779 Pump-Mounted Fuel Metering Valve for Ram and Jeep 3.0L Diesel Applications

0928400779 Pump-Mounted Fuel Metering Valve for Ram and Jeep 3.0L Diesel Applications

This electromechanical metering valve is used within a diesel common rail fuel system to regulate the quantity of fuel entering the high-pressure pump. Its controlled metering function supports the fuel system as operating demand changes. The valve is designed for pump-mounted service and replacement in the applications documented below.

The product tables separate the valve reference numbers from associated pump assemblies and list the catalogued vehicle and engine variants. Confirm the number on the installed component and the high-pressure pump identification before selecting a replacement, since a vehicle model may use more than one fuel-system configuration.
Online Inquiry Contact Us

Product Specifications

Specification

Details

Product type

Pump-mounted fuel metering / regulation valve

OE manufacturer reference

Bosch

Model or reference number

0928400779 / 0 928 400 779

OE numbers

0928400779; 0 928 400 779; 1462C00996; 1 462 C00 996

Fuel system

Diesel common rail; Bosch CP4 pump

Mounting details

2 mounting holes; 2 electrical pins

Condition

New replacement part

Warranty

One year

Associated Bosch CP4 pump numbers (not valve equivalents)

0445010637; 0445010684; 0445010696; 0445010699; 0445010858; 0445012013; 0986437468

Vehicle and Engine Applications

Make

Vehicle models

Engine specification

Displacement / years

Ram / Dodge

Ram 1500 EcoDiesel

3.0 L EcoDiesel

2014–2015

Jeep

Grand Cherokee (WK2)

3.0 L CRD / EcoDiesel V6

2011–2021

The vehicle catalogues use different date spans for this application. Pump and original valve numbers must be matched to the installed configuration.

Equivalent and Cross Reference Numbers

References marked as part of a complete pump assembly in some catalogues are not listed as standalone valve equivalents.

Brand

Reference numbers

Bosch

0928400779; 0 928 400 779; 1462C00996; 1 462 C00 996; 146200996

Mopar

68248412AA; 68444374AA; 5399728

Land Rover / VM Motori

98 113 881 80; 9811388180

Online Inquiry

Submit

Related Products

0928400746 Fuel Metering Valve for MAN TGA TGS TGX and Temsa Diesel Applications

0928400746 Fuel Metering Valve for MAN TGA TGS TGX and Temsa Diesel Applications

This electrically operated fuel metering valve controls the quantity of diesel entering the pumping elements of a compatible high-pressure injection pump. By adjusting inlet flow in response to engine management commands, it forms part of the common rail fuel system pressure-control process. The valve is fitted on the pump and serves as a replacement component for the specified truck and bus configurations.

Applications depend on the original valve number, pump assembly and engine specification. The tables below separate vehicle and engine details from individual valve references, service-kit identification and complete-pump numbers. Use these identification details when selecting a replacement for fuel-system maintenance or repair, particularly where a vehicle series uses more than one injection-pump configuration.

0928400827 Fuel Metering Control Valve for BMW 3.0 Diesel

0928400827 Fuel Metering Control Valve for BMW 3.0 Diesel

This fuel metering control valve regulates the amount of diesel entering a compatible common rail high-pressure pump. Its electromagnetic actuator responds to engine control commands so that pump delivery follows fuel demand and rail-pressure control requirements. The valve is mounted on the low-pressure side of the pump, with a two-pin connector and a two-hole mounting flange.

Supplied as a new aftermarket replacement single valve, it is intended for the documented diesel applications when the original valve identification, pump arrangement and engine configuration agree. The application table retains the available body variants, engine codes, power ratings, trim and factory type references. Model-family entries are identified separately where a precise engine or year is unavailable. Original service-kit hardware is separate from the photographed single valve. A one-year warranty is provided.

0928400690 Fuel Metering Valve for Mitsubishi Fuso Canter and Rosa Diesel Applications

0928400690 Fuel Metering Valve for Mitsubishi Fuso Canter and Rosa Diesel Applications

This fuel metering valve controls the quantity of diesel supplied to the pumping elements of a compatible high-pressure injection pump. Its electrically operated mechanism responds to the engine management system, adjusting inlet flow as operating demand changes. Metering fuel at the pump inlet is part of the common rail pressure-control process and differs from measuring pressure with a sensor or regulating it at the rail.

The replacement component is intended for the documented vehicle, equipment and engine configurations listed below. Original valve identification and the installed injection-pump assembly determine the appropriate replacement. The application information records available model details, engine specifications and catalogue periods. Match the original component marking and pump number before ordering, because model names and engine displacement alone do not establish compatibility with every build.

+86 18658371180

Weichuangzhilian-he

+86 18658371180

wangcong19860920@gmail.com